Dynasonics MFX MagProbe Insertion Magnetic Flow Transmitter
Cost-effective solution for accurate measurement of conductive liquid flow in closed conduit, pressurized-pipe applications.
Overview
Features
- Absolute (bi-directional) measurements from 0.1 to 30 FPS (0.03 to 9 MPS)
- Integrated sensor pre-amplifier permits separation of up to 990 feet (297 m) between the sensor probe and MFX electronic analyzer
- Optional input/output modules include: 4-20mA, dual-relay, rate pulse, RS232 and RS485
- Hot-tap sensor can be installed and retracted from process piping without draining or depressurizing the system
- High impedance input circuits minimize the influence of electrode coating.
- UltraLink PC utility permits configuration and intelligent diagnostics to be performed.
Description
The Dynasonics MFX MagProbe ™ insertion magnetic flow transmitter is a cost-effective solution for accurate measurement of conductive liquid in closed conduit, pressurized-pipes without process shutdown. The "flat tip" design of the Dynasonics MFX MagProbe ™ insertion magnetic flow transmitter will reduce fouling in applications where suspended solids are present.
The Dynasonics MFX MagProbe ™ insertion magnetic flow transmitter reliably measures most conductive fluids including water, sewage, wastewater, clarified water, RAS, WAS, primary sludge, and cooling tower water, as long as adequate lengths of straight pipe are available where the sensor is installed.
The Dynasonics MFX MagProbe ™ insertion magnetic flow transmitter consists of a remote digital display enclosure and a hot-tappable insertion-type sensor that mounts through a 1-1/2" ball valve pipe-tap into the flowing liquid. The digital display is utilized to program engineering units, view flow rate / totalizer values and provide process outputs. Velocity and pipe diameter information are entered by the user via the display keypad or UltraLink ™ software and used to calculate volumetric flow, over wide flow ranges, with a high degree of accuracy.
The Dynasonics MFX MagProbe ™ insertion magnetic flow transmitter includes one set of wall mount brackets and one installation manual.
Documents
Need Help? Call a Flow engineer at 1-800-884-4967
We're open 8:00 am to 5:30 pm ET