Ametek APC Series Advanced Pressure Calibrators

The Ametek APC Series advanced pressure calibrator is the latest in the new generation of Ametek handheld pressure calibrators. Designed to meet high accuracy pressure calibration applications and to make your tasks easier, the Ametek APC Series advanced pressure calibrator offers features such as dual information display, 17 different pressure units, transmitter supply, scalable mA input for % error calculation, serial communications, and external pressure module capability.

The accuracy of the Ametek APC Series advanced pressure calibrator is deadweight caliber throughout the range and is temperature compensated for operation in controlled or in process applications. This is a truly superior pressure calibrator.

Calibration of the Ametek APC Series advanced pressure calibrator may be performed locally without returning the APC unit to the manufacturer. All that is required is an accurate pressure reference.

The Ametek APC Series advanced pressure calibrator also offers a NIST Certification standard for each calibrator. There are other accredited certificates available upon request.

The Ametek APC Series advanced pressure calibrator is available as an indicator only or in one of 6 test ready systems that are complete and equipped to meet your pressure measuring or testing needs. The standard accessories for the Ametek APC Series advanced pressure calibrator system kits include a hand pump, all necessary fittings, teflon tape, and an aluminum carrying case.

APC System A

System A includes the Ametek APC Series advanced pressure calibrator, standard accessories, and one of the following pneumatic hand pumps: T-960 (0 to 2 bar) or T-970 (0 to 40 bar). System A is an easy-to-use single hand operated calibration system. No need for a flat surface to operate the system - just hold it in your hand.

APC System B

System B includes the Ametek APC Series advanced pressure calibrator, standard accessories, and a T-975 pneumatic hand pump (-0.91 to 40 bar). With this pump, you can calibrate both vacuum and pressure applications. It takes just a few seconds to switch between vacuum and pressure.

APC System C

System C includes the Ametek APC Series advanced pressure calibrator, standard accessories, and either a T-620 (0 to 200 bar) or T-620H (0 to 350 bar) hydraulic hand pump.

APC System D

System D includes the Ametek APC Series advanced pressure calibrator, standard accessories, and an easy-to-use hydraulic screw pump (0 to 350 bar) using either water or oil. Place the pump on a flat surface and turn the handle to generate pressure. You can adjust the calibrator to fit the best viewing angle. The system includes a manifold for connection of the test device.

APC System E

System E includes the Ametek APC Series advanced pressure calibrator, standard accessories, and a hydraulic jack pump (0 to 700 bar). The hydraulic pump makes it very easy to prime the system. You can adjust the calibrator to fit the best viewing angle. The system includes a manifold for connection of two test devices, and the fine adjustment vernier valve is standard.

APC System F

System F includes the Ametek APC Series advanced pressure calibrator, standard accessories, and a Type T water or oil pump (0 to 1,000 bar). The system includes a manifold for connection of two test devices, and the fine adjustment vernier valve is standard. System F is available with a number of O-ring materials for increased compatibility with corrosive fluids.

Please refer to the data sheet for more information regarding each system.