Ametek Jofra Inserts for RTC-158 & RTC-250 Reference Temperature Calibrators | Instrumart

Ametek Jofra Inserts for RTC-158 & RTC-250 Reference Temperature Calibrators

Starting at $580.00

View Company Reviews

Manufactured

By Ametek

Includes

FREE Ground Shipping on orders of $1,000 or more
FREE Lifetime Tech Support

Availability

Usually ships in 2-3 weeks

Features

Accurate to ±0.04°C using the external reference sensor
Stability to 0.005°C
Improved temperature homogeneity
Dynamic Load Compensation
Intelligent reference sensors
Display indicator for temperature uniformity
USB communication

This product is an accessory for the following products:

Ametek Jofra RTC-158 & RTC-250 Reference Temperature Calibrators

Ametek Jofra RTC-158 & RTC-250 Reference Temperature Calibrators

Combines dry block and liquid bath technology to calibrate oddly sized and shaped sensors or multiple sensors at once.

Starting at $18,706.00

Using the wrong insertion tube in a dry-block calibrator can prevent the calibrator from meeting the temperature specifications.

Important things to remember when using inserts.

Remove inserts from the well with the insert removal tool.
Remove the inserts after calibration, as it might cause problems to remove them later on if they stay in the well for longer periods.
Take care when removing hot or cold inserts and use adequate protective equipment if necessary.
Make certain that the sensors and inserts are free from any particles or dirt before inserting them into the well. Inserts are designed to fit perfectly into the well thus maximizing the thermal conductivity. If not the insert may be jammed.
Remove regularly build-up of dirt an dust from inserts and wells with a cloth or detergent.

Important things to avoid when using inserts

Do not force inserts or sensors into the well.
Do not drop any foreign materials into the well.
Do not use oil or other liquids to optimize the thermal conductivity due to risk of leakage, which will destroy the other components.
Do not use inserts of metals dissimilar to that of the block, unless specified by the manufacturer as this may cause a different degree of expansion and contraction.

Links

All possible part numbers

Need Help? Call a Calibration engineer at 1-800-884-4967

We're open 8:00 am to 5:30 pm ET

Fabian M.
Applications Engineer

Mike C.
Senior Applications Engineer
24 years at Instrumart

Brynn O.S.
Applications Engineer
3 years at Instrumart

Mark D.
Applications Engineer
13 years at Instrumart

Nate H.
Applications Engineer

Shawn S.
Senior Applications Engineer
29 years at Instrumart

John A.
Senior Applications Engineer
19 years at Instrumart

Angelo S.
Cal & Pressure Engineering Lead
5 years at Instrumart

Liam W.
Applications Engineer
2 years at Instrumart

Fabian M.
Applications Engineer

Mike C.
Senior Applications Engineer
24 years at Instrumart

Brynn O.S.
Applications Engineer
3 years at Instrumart

Mark D.
Applications Engineer
13 years at Instrumart

Nate H.
Applications Engineer

Shawn S.
Senior Applications Engineer
29 years at Instrumart

John A.
Senior Applications Engineer
19 years at Instrumart

Angelo S.
Cal & Pressure Engineering Lead
5 years at Instrumart

Recently Viewed

Ametek Jofra Inserts for RTC-158 & RTC-250 Reference Temperature Calibrators