Waygate Technologies DynaMIC Hardness Testers

Waygate Technologies DynaMIC Hardness Testers (formerly Krautkramer DynaMIC) operate according to the rebound method in which an impact body is impelled against the test surface by spring force. The hardness value is calculated from the ratio of speed of the impact body before impact and after rebounding from the test piece. To improve on this established testmethod, the DynaMIC employs a patented and innovative signal processing technique that automatically compensates for changes in impact direction and distance variations caused when measuring small radii.

With the DynaMIC you are immediately able to carry out measurements in any direction without affecting the accuracy of the test results. It is unnecessary to enter the impact direction of test prior to taking a measurement. This well-known advantage of the UCI method is now at long last also available for rebound hardness testing using the DynaMIC.

A precise calibration for a specific alloy within one of the nine preset material groups or an exotic material is quickly performed and easily recalled later. The DynaMIC even allows you to generate and store additional, company-specific material groups.

By simply pressing a key you can choose between displaying a single value or the average value of a measurement set. Adjustable alarm thresholds indicate critical readings to you both visually and audibly. A special configuration feature allows you to select the scales and features for your particular testing requirements. This simplifies operation and increases operational reliability.

The DynaMIC also ensures measurement reliability by displaying the total number of all measurements taken with an impact device. This assists in scheduling maintenance or predicting replacement of the impact body.

The DynaMIC DL Data Logger model can internally store hardness values along with calculated statistical information. The instrument accepts memory cards which can supplement this data storage capacity and be used as parameter cards. As a parameter card, calibration values and instrument settings can be easily stored and recalled, which ensures the integrity of the test results and simplifies future instrument set-up.

You can print out test reports in a format of your choice or transfer your data to the PC via the RS232 interface. Our application software from the Ultra-HARD series offers you numerous possibilities for further data processing.

Dyna D Impact Device

This choice is a 12Nmm impact device with a 3mm tungsten carbide indenter and includes the MIC-D62 test block.

Dyna G Impact Device

This choice is a 90Nmm impact device with a 5mm tungsten carbide indenter and includes the MIC-G38 test block.

Data Logger Option

This will make your instrument a data logger capable of saving 1,800 measurements. As well as add the MIC-1000 memory card to the included accessories list above.

Waygate Technologies is formerly know as GE Inspection Technologies (GEIT)