WIKA CPG Hydraulic Service Kit

Combination of the CPG1500 digital pressure gauge and CPP700 hand pump, can generate up to 10,000 psi (700 bar).

Retired products cannot be ordered

Please contact Instrumart for a recommended replacement

View Company Reviews

Manufactured

By WIKA

Includes

FREE Ground Shipping
FREE Lifetime Tech Support

Product Manual Product Specs (3 Files)

Features

0.1% FS accuracy (0.05% FS optional)
Integrated data logger for up to 50 values per second
Fluid based on mineral oil or single distilled water
Fine-adjustment valve
Ergonomic handling

Free NIST Calibration with Data

What's in the Box

CPG1500 pressure gauge
CPP700 hydraulic pump
WIKA-Wireless
Protective housing cap
Carrying case (plastic)
Factory calibration report

The WIKA CPG1500 Pressure Gauge features the accuracy of digital measurement technology and the simplicity of an analog gauge. It offers an accuracy of 0.1% of span (optional 0.05% of span) and is temperature-compensated in the range of 14 to 122°F (-10 to 50°C). Readings can be displayed in one of 21 standard units or also in customer specific units, so that intricate conversions are avoided.

The measuring rate can be user-defined to match the type of measurement required. Standard applications usually use three measured values per second. If required, this rate can also be set to 50 measured values per second. The clear display, with integral bar graph display and large text area, assists with the effective analysis of the widest variety of measuring points.

The WIKA CPP700 hydraulic hand pump is used for generating pressure to test, adjust and calibrate mechanical and electronic pressure measuring instruments by means of comparative measurements. Testing can take place in a laboratory or workshop, or on site at the measuring point. When the device under test and a suitably accurate reference measuring instrument are connected to the test pump, after actuating the pump, the same pressure will act on both measuring instruments. Calibration or adjustment of the device under test can be carried out by comparing the two measured values at any pressure value.