Tiltmeters

Jewell Instruments C801 Tuff Tilt 420 Tiltmeter

Current loop powered, gravity referenced ceramic tilt sensor, weatherproof enclosure, range: ±0.5°/±3°/±50°.

Starting at $1,210.00

Jewell Instruments D801 Tuff Tilt Digital Tiltmeter

Uniaxial and Biaxial tiltmeter, input range ±3° & 50°, indoor or outdoor continuous monitoring, 16-bit A/D resolution.

Starting at $1,675.00

Jewell Instruments D701 Tiltmeter

Digital Platform Tiltmeter, NEMA 4X protection, RS232 and RS422 output versions, graphical ZAGI user interface software.

Select options for pricing

Jewell Instruments ECS Series eCompass

Standard electronic compass featuring quick-connect, external serial interface that facilitates easy access for calibration and tuning.

Select options for pricing

Jewell Instruments C802 DeepWater 4-20mA Tiltmeter

Submersible Tiltmeter, 316 stainless steel housing, high pressure neoprene connector with 700 bar depth rating.

Starting at $0.00

Jewell Instruments A900 Biaxial Tiltmeter

Measures rotation in two orthogonal vertical planes, detailed 21-point calibrations supplied for each axis.

Starting at $510.00

Jewell Instruments MD908 IRIS Tilt Switch Controller

Detects angular position with an onboard electrolytic tilt sensor, multi-featured inclinometer.

Starting at $1,017.50

Jewell Instruments A802 DeepWater Submersible Tiltmeter

Precision voltage-output tiltmeter designed for underwater measurements and other applications under high pressure.

Starting at $3,193.00

Jewell Instruments D802 DeepWater Digital Tiltmeter

Digital submersible tiltmeter, high pressure applications and corrosive environments, 316 stainless steel body.

Starting at $3,588.00

Jewell Instruments ECV Series eCompass

3D electronic compass provides stable azimuth, pitch, and roll measurements in dynamic conditions.

Select options for pricing

Jewell Instruments ECG Series eCompass

Electronic compass with gyro for applications involving vibration, acceleration, uneven terrain, or rough seas.

Select options for pricing

Jewell Instruments Model C820 Series Tiltmeter

Submersible tiltmeter designed for fresh and salt water applications with 4-20mA output.

Select options for pricing

Jewell Instruments Model A820 Series Tiltmeter

Shallow water analog tiltmeter, ±0.5°, ±3°, ±50° ranges available, uniaxial or biaxial.

Select options for pricing

Jewell Instruments Model D820 Series Tiltmeter

Submersible tiltmeter for use in fresh and salt water applications with RS232 or RS422 digital output.

Select options for pricing

Jewell Instruments D711 Tiltmeter

Precision Biaxial Tiltmeter, NEMA 4X protection, angular ranges: ±0.5°/±5°/±80°, user-selectable firmware.

Select options for pricing

Jewell Instruments A701-2 (4X) Platform Tiltmeter

Precision biaxial tiltmeter, NEMA 4X designation, range: ±0.46°/±4°, fixed gain and filter settings, adjustable Invar legs.

Select options for pricing

Jewell Instruments A701-2 Platform Tiltmeter

Switchable gain and low-pass filter settings, built-in Invar leveling legs, two orthogonal tilt sensors, drives signals over cables greater than 1000m.

Select options for pricing

Jewell Instruments A711-2 (4X) Weatherproof Tiltmeter

Precision biaxial tiltmeter, floor mount, NEMA 4X protection, 0.5 inch holes in its three corners fit over threaded stainless steel studs.

Select options for pricing

Jewell Instruments A711-2 / A716-2 Tiltmeter

Bolt or clamp to any surface, floor or wall mount, suited for high traffic and vibration, high gain and mid range models available.

Select options for pricing

Filter Tiltmeters

Recently Viewed