Ametek IPI Series Industrial Pressure Indicator

The Ametek IPI Series industrial pressure indicator combines the accuracy of analog with the usability of digital. Featuring 18 different pressure units with high accuracy, the Ametek IPI Series industrial pressure indicator even has serial communications. The accuracy is ± 0.05% of full scale for positive pressure ranges up to 500 psi making it comparable to a pressure calibrator. The Ametek IPI Series industrial pressure indicator is also temperature compensated for shop or process applications. This versatile unit is available as a stand alone indicator or in a complete test system.

With the Ametek IPI Series industrial pressure indicator, you have the capability of performing your own calibrations, needing only a pressure reference. Using the configuration key, you can set one of 20 different engineering units to customize your measurements. This, along with a temperature display, an adjustable sample rate and Tare value provide you with a highly versatile pressure indicator.

The Ametek IPI Series industrial pressure indicator is available as an indicator only or in one of 6 test ready systems that are complete and equipped to meet your pressure measuring or testing needs.

Ametek IPI System A

System A includes the Ametek IPI Series industrial pressure indicator, standard accessories, and one of the following pneumatic hand pumps: T-960 (0 to 2 bar) or T-970 (0 to 40 bar). System A is an easy-to-use single hand operated calibration system. There is no need for a flat surface to operate the system - just hold it in your hand.

Ametek IPI System B

System B includes the Ametek IPI Series industrial pressure indicator, standard accessories, and a T-975 pneumatic hand pump (-0.91 to 40 bar). With this pump you can calibrate both vacuum and pressure applications. It takes just a few seconds to switch between vacuum and pressure.

Ametek IPI System C

System C includes the Ametek IPI Series industrial pressure indicator, standard accessories, and either a T-620 (0 to 200 bar) or T-620H (0 to 350 bar) hydraulic hand pump.

Ametek IPI System D

System D includes the Ametek IPI Series industrial pressure indicator, standard accessories, and an easy-to-use hydraulic screw pump (0 to 350 bar) using either water or oil. Place the pump on a flat surface and turn the handle to generate pressure. You can adjust the calibrator to fit the best viewing angle. The system includes a manifold for connection of the test device.

Ametek IPI System E

System E includes the Ametek IPI Series industrial pressure indicator, standard accessories and a hydraulic jack pump (0 to 700 bar). The hydraulic pump makes it very easy to prime the system. You can adjust the calibrator to fit the best viewing angle. The system includes a manifold for connection of two test devices, and the fine adjustment vernier valve is standard.

Ametek IPI System F

System F includes the Ametek IPI Series industrial pressure indicator, standard accessories, and a Type T water or oil pump (0 to 1,000 bar). The system includes a manifold for connection of two test devices, and the fine adjustment vernier valve is standard. System F is available with a number of O-ring materials for increased compatibility with corrosive fluids.

Please refer to the data sheet for more information regarding each system.