Fluke 719 Electric Pressure Calibrator
Pressure calibrator with innovative built-in electric pump for one-handed pressure calibration.
- By Fluke
Overview
Features
- Fluke 719 30G
- Range: -12 to 36 PSI
- Resolution: 0.001 PSI,
- Accuracy: up to 0.025%
- Fluke 719 100G
- Range: -12 to 120 PSI
- Resolution: 0.01 PSI
- Accuracy: up to 0.025%
- mA:
- Range: 0 to 24 mA
- Accuracy: 0.015 % Rdg + 2 counts
- Max load: 1000Ω; 750 Ω ohm in HART mode
- Pump to:
- 30 PSI in less than 15 seconds (1m of 1/8" test hose)
- 100 PSI in less than 45 seconds (1m of 1/8" test hose)
- 5000 pump cycles between rebuilds
- Pump life: 20,000 calibration cycle
- Safety: CSA C22.2 No. 1010.1:1992
- EMC: EN50082-1:1992 and EN55022:1994 Class B
Description
The Fluke 719 electric pressure calibrator features an innovative, built-in electric pump. Now you can calibrate and test pressure devices quickly and easily with one hand. Use the programmable pump limit settings to eliminate over-pressurization and to set 'pump to' pressure values.
The Fluke 719 calibrator has a unique cleanout port design that reduces pump failures and makes the Fluke 719 easy to clean without repair. The compact, lightweight form, combined with one-handed use, makes this pressure calibrator the ideal tool for busy process professionals.
The Fluke 719 electric pressure calibrator features best in class pressure measurement accuracy of 0.025% and mA accuracy of 0.015%. The pressure adjust vernier increases calibrator precision and the variable release rate bleed valve allows for easy pressure adjustment. Together these features put the Fluke 719 at the ideal performance level for high accuracy transmitter calibration.
The Fluke 719 electric pressure calibrator is available in two pressure ranges; 30 PSI and 100 PSI. The programmable pump limit feature eliminates over-pressurization and allows the user to program target pressures for pumping. The Fluke 719 can source mA signals with simultaneous pressure measurement to test valves and I/Ps. It can also simulate mA signals to troubleshoot 4-20 mA loops.
The Fluke 719 electric pressure calibrator ships complete with:
- TL75 test leads
- AC72 alligator clip set
- Push fit connectors
- Translucent test hose
- Product overview manual (print)
- User's manual (CD-ROM)
Documents
Accessories
Sensors/Probes
Cases
Accessories
Please consider these optional accessories.
Need Help? Call a Temperature engineer at 1-800-884-4967
We're open 8:00 am to 5:30 pm ET
