Fluke Professional Tool Backpack

True-RMS for accurate AC measurements on non-linear loads up to 600V.

True-RMS for accurate AC measurements on non-linear loads up to 600V.

True RMS meter for electrical "go/no-go" troubleshooting.

Compact, True RMS multimeter for field service technicians.

Compact True RMS meter for HVAC applications.

Combines the Fluke 116 Digital Multimeter & the Fluke 323 True-rms Clamp Meter, for efficient troubleshooting & problem solving.

-22 to 1202°F, 12:1 (D:S), ±1% accuracy Fluke 62 MAX+ infrared thermometer & 116 HVAC multimeter provides effective troubleshooting.

Compact True RMS meter for commercial applications.

Value-packed kit that provides the meters and accessories an electrician needs.

Integrated test tool with oscilloscope, multimeter, and high-speed recorder in one easy-to-use instrument.

500V & 1000V insulation test voltages for troubleshooting and preventative maintenance applications.

Insulation test voltages from 50 to 1000V for troubleshooting and preventative maintenance applications.

Standalone tablet based HART communication tool, configured with the FlukeHART mobile app.

Test a wide range of high voltage equipment up to 5kV, compatible with Fluke Connect .

Test a wide range of high voltage equipment up to 10kV, compatible with Fluke Connect .

Digital insulation tester for 500V and 1000V combined with a True RMS digital multimeter.

Digital insulation tester for 50, 100, 250, 500 and 1000V combined with a True RMS digital multimeter.

Includes a Fluke 1587 FC insulation multimeter, Fluke i400 current clamp, and a Fluke 9040 phase rotation indicator.

3 & 4 pole fall-of-potential, earth resistance loop testing, 4-pole soil resistivity testing, data storage & download capabilities via USB port.

3 & 4 pole fall-of-potential, earth resistance loop testing, 4-pole soil resistivity testing, data storage & download capabilities via USB port.

Stakeless earth ground loop and ac leakage current clamp, 1000V max voltage, 40Hz to 1kHz frequency range, Fluke Connect.

A solid, basic installation tester used to verify the safety of electrical installations in domestic, commercial and industrial applications.

Advanced installation tester used to verify the safety of electrical installations in domestic, commercial and industrial applications.

Full featured installation tester with Fluke Connect verifies the safety of electrical installations in commercial and industrial applications.

Automatically capture and log voltage, current, power, power factor, energy and associated values, & Fluke Connect compatible.

Automatically capture and log voltage, current, power, harmonics and associated power quality values, Fluke connect compatible.

Automatically capture and log voltage, current, power, harmonics and associated power quality values, Fluke connect compatible.

True RMS AC voltage range 600 mV to 1000V (1 kHz), Manual and automatic ranging.

Class-A compliance for demanding power quality tests.

True-rms ac voltage and current, 6000 count display, Frequency and capacitance capabilities.

True RMS AC voltage and current for accurate readings on all waveforms.

Two or four-channel, handheld portable oscilloscope with CAT III 1000 V/CAT IV 600 V safety rating.

Pocket-sized voltage detector.

Removable display allows meter and the display to be in two different locations for unusual measurement scenarios.

Precision pressure measurement from 15 psi (100 kPa) to 10,000 psi (70 MPa), 0.02% of full scale accuracy, rugged construction.

Rugged waterproof and dustproof (IP67 rated) industrial multimeters.

The most rugged intrinsically safe digital multimeter in the world.

Designed for R&D, maintenance, manufacture and design of electronic circuits or systems, built with Fluke Connect.

True RMS industrial and electronics logging multimeter with TrendCapture, built with Fluke Connect.

True RMS industrial and electronics logging multimeter with TrendCapture, compatible with Fluke Connect Mobile App.

Wireless and Fluke Connect compatible multimeter, AC & DC voltage modules, and iFlex AC current module.

Wireless and Fluke Connect compatible multimeter, True-RMS AC clamp meter, and type-K temperature module .

Wireless and Fluke Connect compatible multimeter, AC voltage module, and 3 iFlex AC current modules with probes.

Wireless and Fluke Connect compatible multimeter, AC voltage module, and 3 iFlex AC current modules with probes.

Fluke Connect meter that measures up to 1000V and 400mA AC/DC, frequency, capacitance, resistance, continuity, and diode.

Portable pressure calibrator features an internal, motorized pump for easy and efficient pressure generation.

400 A ac current measurement, True-rms ac voltage and current, Resistance measurement to up to 40 kΩ.

Large easy to read backlight display, temperature and capacitance measurements.

400 A ac current measurement, ac and dc current, frequency measurement.

Monitors electrical parameters of three-phase devices & streams data to the Fluke Connect cloud for remote access from a mobile device.

True RMS meters with extra-wide jaws suitable for high-current measurements up to 2000A.

Thin, small jaw design that detaches from the meter and makes it easy to get around tightly packed wires.

1.5in (40mm) jaw size with AC measuring up to 60A, True-rms, and Fluke Connect compatible.

2.4in (61mm) jaw size with AC measuring up to 60A, True-rms, and Fluke Connect compatible.

2.4in (61mm) jaw size with AC measuring up to 60A, True-rms, and Fluke Connect compatible.

Clamp meter that reads up to 600A AC and 600V AC or DC.

Clamp meter that reads up to 600A AC and 600V AC or DC.

Fluke connect compatible clamp meter that tests up to 1000V and 600A with 6000Ω resistance measurement.

Fluke connect compatible logging clamp meter that measures 1000V, 600A and resistances up to 60kΩ.

Fluke connect compatible logging clamp meter that measures 1000V, 1000A and resistances up to 60kΩ.

Detachable, remote display and iFlex flexible current probe for easier, faster and safer measurements.

Fluke 54, 53 52, 51, Dual/single input digital thermometers that feature laboratory accuracy (0.05% + 0.3°C).

Test tool for maintaining, troubleshooting, and testing individual stationary batteries and battery banks.

-40 to 1022°F, 12:1 (D:S), ±1% accuracy, laser sight, adjustable emissivity, K-type thermocouple.

-40 to 1202°F, 30:1 (D:S), ±1% accuracy, laser sight, adjustable emissivity, hard case.

-40 to 1472°F, 50:1 (D:S), ±1% accuracy, stands up to tough industrial, electrical & mechanical environments, features hi & low alarms.

-40 to 1472°F, 50:1 (D:S), ±1% accuracy, laser sight, adjustable emissivity, USB Interface.

-22 to 1652°F, 60:1 (D:S), ±1% accuracy, dual laser sight, adjustable emissivity .

-22 to 662°F, 8:1 (D:S), ±1.5/2% accuracy, with precise laser technology & less than 500ms response time.

-22 to 932°F, 10:1 (D:S), ±1.5% accuracy with less than 500ms response time, IP40 rated & LCD display .

-22 to 932°F, 10:1 (D:S), ±1.5% accuracy, lightweight, rugged, dust & water resistant with adjustable emissivity.

-22 to 1202°F, 12:1 (D:S), ±1% accuracy, lightweight, rugged, dust & water resistant.

14 to 752°F, 12:1 (D:S) with Fluke 62 Max+ infrared thermometer, includes Fluke 323 clamp meter & 1AC II VoltAlert voltage detector.

-22 to 1202°F, 12:1 (D:S), ±1% accuracy infrared thermometer with Fluke 323 clamp meter & T+PRO voltage & continuity tester.

-22 to 1112°F, 20:1 (D:S), ±1% accuracy IR thermometer capable of unattended monitoring with internal memory for 99 data points.

Calibration, repair, and maintenance of current loops from 0 to 24 milliamps.

Precision pressure measurement from 15 psi/1 bar to 10,000 psi/690 bar, absolute ranges of 15, 30, 100, 300 psia.

Hydraulic pressure pump capable of generating calibration pressures up to 10,000 psi / 690 bar.

Hydraulic pressure test kit includes hand pump, hoses and adapters for testing devices to 10,000 psi.

Hand operated pressure pump designed to generate either vacuum to -13 psi / -.90 bar or pressures to 100 psi / 6.9 bar.

Hand-operated pressure pump for generating pressures up to 150 psi / 1000 kPa.

Pneumatic test pump capable of supplying pressures up to 600 psi / 40 bar.

Rugged, high-quality premium pneumatic pressure pump kit for fast and accurate test results generates pressure up to 600 psi, 40 bar.

Rugged, high-quality premium pneumatic pressure pump kit for fast and accurate test results generates pressure up to 600 psi, 40 bar.

Precision current loop calibrators with optional HART communications provides best in class accuracy and an intuitive interface.

Measures & simulates 13 different RTD types & resistance, measures 4-20mA signals while simultaneously sourcing a temperature signal.

Measures and simulates 17 different thermocouple types, measure 4 to 20 mA signals while simultaneously sourcing a temperature signal.

Simultaneous pressure and current measurement.

Four models to provide a total pressure calibration solution for transmitters, gauges & switches.

Powerful, intrinsically safe, self-contained portable pressure calibrator for usage in explosion endangered areas.

Pressure calibrator with innovative built-in electric pump for one-handed pressure calibration.

30, 150 and 300 psi pressure ranges, unique integrated electric pump for one handed pressure calibration.

Dual isolated pressure sensors, 16 or 36 psi for sensor 1, seven input ranges for sensor 2, ideal for gas flow calibration applications.

Measures and sources 12 thermocouple types and seven RTD types.

Measure and source mA, volts, temperature (RTDs and thermocouples), frequency, ohms and pressure.

Measure, source, and view process signals simultaneously with accuracies of 0.01%.

Automatically generate & regulate pressure up to 300 psi & document results, with HART & electrical calibration of 4-20mA signals.

Sources, simulates and measures pressure, temperature, and electrical signals.

Integrated HART communication capability, sources, simulates and measures pressure, temperature, and electrical signals.

Simple-to-use digital multimeter with the features needed to repair most electrical and electronic problems.

Measures 4-20mA signals without breaking the loop.

Measures 4 to 20 mA signals without breaking the loop, simultaneously measure mA in-circuit with 24 V loop power.

Measure 4-20mA signals without breaking the loop, DC voltage measurement, simultaneously measure mA in-circuit with 24V loop power.

Measure AC and DC volts, AC and DC current, resistance, continuity, and frequency, Fluke Connect capabilities.

Combines functionality of a loop calibrator with the power of a digital multimeter, Compatible with Fluke Connect Mobile App.

True RMS multimeter with built-in selectable 250 ohm HART resistor, built with Fluke Connect.

Innovative sensor design minimizes measurement variations caused by device angle or contact pressure, Fluke Connect compatible.

On-board identification and location of the most common mechanical faults, fault severity scale with four levels.

30 to 300,000 FPM (flashes per minute), 0.02% accuracy, digital pulse width modulation.

Coaxial reflected single laser beam sensor, up to 8 measurement points to achieve precision alignment on vertical machines.

Industrial multimeter measuring up to 1000V AC and DC.

True RMS multimeter with advanced measurement functions, trouble-shooting features, resolution and accuracy .

Includes special accessories to make industrial troubleshooting with the Fluke 87V multimeter even more productive.

Dual display multimeter that measures volts, ohms, and amps with 5.5 digit resolution and basic VDC accuracy of up to 0.015%.

Digital multimeter for automotive technicians to solve virtually any problem on conventional and hybrid vehicles.

HVAC optimized clamp meter enables technicians to create reports and collaborate with peers from the work site.

Compact and lightweight humidity and air temperature meter.

Troubleshooting and monitoring indoor air quality, six channels, lightweight .

True-RMS 400A current clamp meter that wirelessly relays measurements to other Fluke Connect enabled master units.

Includes the A3000FC clamp module and 3000FC digital multimeter, equipped with Fluke Connect.

True-RMS 2500A flexible current clamp meter that wirelessly relays measurements to other Fluke Connect enabled master units.

Includes the A3001FC clamp module and 3000FC digital multimeter, equipped with Fluke Connect.

Designed to be used with the i410 or i1010 AC/DC current clamps (not included), Fluke Connect enabled.

Quickly and accurately displays CO levels from 0 to 1000 ppm.

High resolution 1200 x 720 videoscope with a high definition probe, Wi-fi connectivity & video streaming capabilities via Fluke Connect.

Pen-style non-contact AC voltage detector with LED flashlight.

High precision power analyzers provide reliable, highly accurate measurements for the test & development of power electronics.

Portable, battery-powered voltage source provides a safe method to verify that your electrical test tool is operating properly.

76,800 pixels (320 x 240), 14 to 2192°F, sensitivity < 0.030°C, 60Hz frame rate, with SmartView software and automatic MultiSharp focus.

307,200 pixels (640 x 480), 14 to 2192°F, sensitivity < 0.040°C, 60Hz frame rate, with SmartView software and automatic MultiSharp focus.

Electrical testers featuring three forms of AC/DC voltage indication: light, sound and vibration.

Versatile K-type thermocouple thermometer wirelessly relays measurements to your phone or tablet via the Fluke Connect App.

Combines 3000FC Digital Multimeter and T3000 FC Temperature Module, equipped with Fluke Connect.

Voltage, continuity and current testers available in 600V or 1000V models.

Electrical testing kit includes T5-1000 tester, 1AC II Voltage Tester and the Fluke H5 holster.

TrueRMS tester measures voltage & current without test leads making contact to live voltage.

614,400 pixels (1280 x 960) with SuperResolution, 14 to 1832°F, sensitivity up to ≤0.025°C & Fluke Connect.

76,800 (320 x 240) pixel resolution, -4 to 752°F, sensitivity ≤ 0.045°C, 30Hz frame rate, Fluke Connect compatible.

307,200 pixels (640 x 480), -4 to 1472°F, ≤0.05°C sensitivity, MultiSharp Focus, & Fluke Connect.

Fully functional true-rms voltage meter that wirelessly relays ac voltage measurements to your phone or tablet via the Fluke Connect App.

Combines the V3000 FC True-rms AC Voltage Module and the 3000FC Wireless Digital Multimeter, equipped with Fluke Connect.

Fully functional DC voltage meter that wirelessly relays dc voltage measurements to your phone or tablet via the Fluke Connect App.

Fully functional DC voltage meter that wirelessly relays dc voltage measurements to your phone or tablet via the Fluke Connect App.

Combines the Fluke 3000 FC Multimeter and the V3001 FC DC Voltage Module, equipped with Fluke Connect.

Combines 3000 FC Multimeter, DC voltage module and AC module, equipped with Fluke Connect capabilities.

Easy-to-use, immediate action with less downtime.

Lamp, ballast, non-contact voltage, pin continuity, and ballast-type tests to ensure your fluorescent lights work properly.

Accurately measures and logs thermocouples, PRTs, thermistors, DC voltage, DC current and resistance.

Basic earth ground tester with 3-pole Fall-of-Potential as well as 2-pole ground resistance measurements.

Threshold-free recorder that automatically detects, scales, & powers current probes.

Four-channel, handheld portable oscilloscope with 1000 V CAT III/600 V CAT IV safety rating.

Full-featured digital multimeter with integrated thermal imager designed to increase your productivity and confidence.

Self-leveling, horizontal- and vertical-cross line laser level for rapid, accurate leveling and layout, choice of red or green laser.

AC/DC current, data logging, troubleshoots modern electrical loads.

Self-leveling 3-point laser level, allows for fast and accurate layout of reference points, choice of red or green laser.

Energy loss calculator, power inverter efficiency, detailed loss analysis.

Energy loss calculator, power inverter efficiency, powerwave data capture.

400Hz, energy loss calculator, power inverter efficiency, detailed loss analysis.

Test electrical and mechanical performance of electric motors, and evaluate power quality with a single test tool, Fluke Connect optional.

Test electrical and mechanical performance of electric motors, and evaluate power quality with a single test tool, Fluke Connect optional.

Measures radiation rate and accumulated dose from beta, gamma and x-ray radiation sources.

0 to 525°F, 8:1 (D:S), ±2% accuracy, ideal for measuring surface temperatures of hard-to-reach, electrically live & extremely hot targets.

-25 to 999°F, 12:1 (D:S), ±1% accuracy, laser sight, fixed emissivity (.95), hard case .

Intrinsically safe milliamp calibrator for sourcing and measuring current loops, from 0 to 24mA, in explosion endangered areas.

Sources and measures dc voltage, current, resistance, RTDs and thermocouples.

Handheld DMM and loop calibrator with 0.05% accuracy and 1 microamp resolution.

Coaxial, reflected laser beam measurement technology provides reduced errors from backlash resulting in better data accuracy.

Voltage up to 1000VDC with 0.0035% accuracy, current, resistance, and frequency measurements.

Voltage up to 1000VDC with 0.0024% accuracy, current, resistance, frequency, capacitance, and temperature measurements.

Five powerful tools in one makes indoor air quality testing quick and easy.

High resolution 800 x 600 videoscope with a high definition probe & dual view camera, transfers data via USB.

Combines the Fluke Ti200 Thermal Camera, 3000 FC Multimeter and the A3001 iFlex into one kit, built with Fluke Connect.

Combines the Fluke Ti300 Infrared Camera, 3000 FC Multimeter and the A3001 iFlex Module into one kit, built with Fluke Connect.

Combines the Fluke VT04 Infrared Thermometer, 376 Clamp Meter and the 117 Digital Multimeter.

Combines the Fluke VT04 Visual Infrared Thermometer and the Fluke 1507 Insulation Resistance Testers.

-30°F to 525°F, 2.5:1 (D:S), ±2°F accuracy, laser sight, fixed emissivity, RTD probe, washable, holster .

Multi-channel data acquisition system, up to 66 inputs, digital multimeter, graphical color display.

Compact UV flashlight that instantly highlights leak detection dyes.

30,000 pixels (200 x 150), -4 to 1202°F, sensitivity ≤0.075°C at 30°C, LaserSharp Auto Focus, & Fluke Connect.

43,200 pixels (240 x 180), -4 to 1112°F, sensitivity ≤0.05°C, rugged construction , and one-handed use.

58,800 pixels (280 x 210), -4 to 1112°F, sensitivity ≤0.05°C, rugged construction, high resolution, and one-handed use.

43,200 pixels (240 x 180), -4 to 1202°F, sensitivity ≤0.05°C at 30°C, LaserSharp Auto Focus, & Fluke Connect.

43,200 pixels (240 x 180), -4 to 1202°F, sensitivity ≤0.04°C at 30°C, LaserSharp Auto Focus, & Fluke Connect.

Combines the Fluke Ti400 Thermal Imager, 3000FC Digital Multimeter and the A3001 Module, equipped with Fluke Connect capabilities.

76,800 pixels (320 x 240), -4 to 2192°F, sensitivity ≤0.05°C at 30°C, & Fluke Connect.

76,800 pixels (320 x 240), -4 to 2192°F, sensitivity ≤0.04°C at 30°C, & Fluke Connect.

Up to 307,200 pixels (640 x 480) with SuperResolution, -4 to 2192°F, sensitivity of ≤0.05°C, & Fluke Connect.

Offers up to 307,200 pixels (640 x 480) with SuperResolution, 14 to 2732°F, sensitivity up to ≤0.025°C & Fluke Connect.

307,200 pixels (640 x 480) with SuperResolution, -4 to 2192°F, sensitivity of ≤0.05°C, SF6 gas leak detector.

307,200 pixels (640 x 480), -4 to 1472°F, ≤0.05°C sensitivity, MultiSharp Focus, & Fluke Connect.

58,800 pixels (280 x 210), -4 to 302°F, sensitivity 0.045°C, one-handed, rugged consruction, and high resolution.

58,800 pixels (280 x 210), -4 to 302°F, sensitivity ≤0.045°C, one-handed, rugged construction.

76,800 pixels (320 x 240), -4 to 302°F, sensitivity ≤0.04°C, torture tested, high resolution, point and shoot.

4800 (80 x 60) pixel resolution, -4 to 482°F, sensitivity ≤0.15°C, 9Hz frame rate, compatible with Fluke Connect.

10,800 (120 x 90) pixel resolution, -4 to 662°F, sensitivity ≤0.10°C, 9Hz frame rate, compatible with Fluke Connect.

19,200 (160 x 120) pixel resolution, -4 to 662°F, sensitivity ≤ 0.09°C, 9Hz frame rate, compatible with Fluke Connect.

19,200 (160 x 120) pixel resolution, -4 to 662°F, sensitivity ≤ 0.09°C, 30Hz frame rate, Fluke Connect compatible.

36,300 (220 x 165) pixel resolution, -4 to 842°F, sensitivity ≤ 0.08°C, 9Hz frame rate, Fluke Connect compatible.

36,300 (220 x 165) pixel resolution, -4 to 842°F, sensitivity ≤ 0.08°C, 30Hz frame rate, Fluke Connect compatible.

50,700 (260 x 195) pixel resolution, -4 to 1022°F, sensitivity ≤ 0.08°C, 9Hz frame rate, Fluke Connect compatible.

50,700 (260 x 195) pixel resolution, -4 to 1022°F, sensitivity ≤ 0.08°C, 30Hz frame rate, Fluke Connect compatible.

76,800 (320 x 240) pixel resolution, -4 to 1022°F, sensitivity ≤ 0.08°C, 30Hz frame rate, compatible with Fluke Connect.

786,432 pixel resolution (1024 x 768), -40 to 3632°F, sensitivity ≤0.05°C, & Fluke Connect.

76,800 pixels (320 x 240), -4 to 1202°F, ≤ 0.045 °C at 30 °C, built with Fluke Connect, super resolution mode.

Up to 640x480 (307,200 pixels), -20 to 850°C range, LaserSharp autofocus, & Fluke Connect.

Up to 640 x 480 (307,200 pixel) resolution, -20 to 1200°C range, LaserSharp autofocus, & Fluke Connect.

307,200 pixel resolution (640 x 480), -40 to 1112°F, ≤0.04°C sensitivity, & Fluke Connect.

14 to 482°F, ±2% accuracy, 28° x 28° field of view with 6.5 to 14μm spectral band & built in digital camera.

14 to 482°F, ±2% accuracy, 28° x 28° field of view & 6.5 to 14μm spectral band.