Martel PSC-4010 Process Calibrator

High accuracy, portable process signal calibrator.

Retired products cannot be ordered

The Fluke 725 Multifunction Process Calibrator is the recommended replacement.

View Company Reviews

Part Number

1919895

Manufactured

Includes

FREE Ground Shipping
FREE Lifetime Tech Support

Features

Simple, straight forward, Intuitive user interface
Easy to learn yet powerful 3 Key Martel Menu System
New ClearBrite™ Graphic Display
New streamlined case design
Reads and simulates process control signals voltage, current, and frequency
Multiple input/output ranges for current, frequency, and voltage modes
Built-in 24 VDC source for powering two wire transmitters
Accuracy ± 0.015% of reading
Includes NIST Certificate with calibration data

The Martel PSC-4010 process calibrator is a hand-held, full function voltage and current calibrator with the capability to both read and simulate common process control signals.

The Martel PSC-4010 process calibrator incorporates multiple input/output ranges for both current and voltage operating modes. When operated in the current mode, the Martel PSC-4010 process calibrator can source, simulate, or read over a 0 to 24 mA range with 0.01 mA resolution. The Martel PSC-4010 process calibrator can also supply 24 VDC to power a two-wire transmitter while simultaneously reading back its output both in milliAmps or as a % of full scale. When operated in the voltage range, the Martel PSC-4010 process calibrator can read or source over two ranges, 0 to 20.00 V or 0 to 200.0 mV.

For your convenience, you can store up to three (3) calibration points in the memory of your Martel PSC-4010 process calibrator for each voltage or current range. These calibration points are non-volatile and will remain in memory until the user changes them.

The Martel PSC-4010 process calibrator ships complete with:

(4) AA Alkaline batteries
(1) Test lead
Full Rubber boot
Instruction manual
NIST Certificate with calibration data

DC Voltage

Display	Range	Accuracy
Non-isolated	0.000 to 20.000 V	0.015% ± 2 mV
Source	0.000 to 20.000 V	0.015% ± 2 mV

DC Current

Display	Range	Accuracy
Non-isolated	0.000 to 24.000 mA	0.015% ± 2 µA
Source	0.000 to 24.000 mA	0.015% ± 2 µA

Frequency

Display	Range	Accuracy
Measurement	2.0 to 600.0 CPM	0.05% ± 0.1 CPM
	1.0 to 1000.0 Hz	0.05% ± 0.1 Hz
	1.00 to 10.00 kHz	0.05% ± 0.01 kHz
Source	2.0 to 600.0 CPM	0.05%
	1.0 to 1000.0 Hz	0.05%
	1.00 to 10.00 kHz	0.125%
	1.00 to 10.00 kHz	0.125%

MilliVolts

Display	Range	Accuracy
Read	0000 to 90.000 mV	0.02% ± 10 µV
Source	0.000 to 100.000 mV	0.02% ± 10 µV

General Specifications

Power Supply	4 x AA batteries, alkaline or optional rechargeable
Display	High contrast 128 x 64 pixel addressable graphic LCD w/daylight backlight
Serial Communications	ASCII, RS-232 (requires optional Martel 1919069 serial cable or 1919896 USB cable)
CE-EMC	EN50082-1 and EN55022: 1994 Class B
Safety	CSA C22.2 No. 1010-1: 1992
Protection	IP54; Protected against misconnection to 250 VAC/VDC
Operating Temperature	-10 to 50°C
Dimensions	8.5 x 4.8 x 2.1"
Weight	1.8 lbs