The Waygate Technologies MIC 20 Hardness Tester (formerly Krautkramer MIC 20) is a versatile two-in-one tester combining the
ultrasonic contact impedance (UCI) and rebound test methods.
The UCI method determines the hardness of a material on the basis of the size of the test indentation left behind in the material by a Vickers diamond after
applying the test load. In the case of the rebound method, an impact body is impelled by spring force against the test surface. The impact and rebound velocities
are each measured in a non-contact mode; the hardness value is calculated from these two values.
The MIC 20 automatically sets to the corresponding method as soon as you connect a UCI probe or a rebound impact device.
The two methods enable you to easily measure the hardness of your test object in a matter of seconds: place probe or impact device on the test object, and read
the measured value on the display. In this way you can measure anywhere and in any direction. We have used a patented signal processing to also put this advantage
into practice for the rebound hardness method.
Waygate Technologies MIC 20 Hardness Tester Includes:
- Operating manual
- Carrying case
- MIC 20-BAT NiMH rechargeable battery pack
- AC power supply / NiMH pack charger (100 to 240 VAC, auto sensing)
- Certificate of conformity
***Probe kit required but not included***
Probe options are under the accessories tab.
Waygate Technologies MIC 20 Hardness Tester Applications:
UCI Hardness Testing:
- Ready-assembled machines
- Heat-affected zone of a weld (e.g. pipeline)
- Heat-treated surfaces (e.g. tooth flanks)
- Coatings(e.g. rotogravure cylinders)
Rebound Hardness Testing:
- Machine parts or motor units made of steel and cast aluminum alloys
- Solid, coarse-grained components having a surface as rolled
- Large series parts during production
- Heavy forgings
Waygate Technologies is formerly know as GE Inspection Technologies (GEIT)
