Wilcoxon Sensing Technologies R6W Series Cable

Compact, general purpose IEPE accelerometer, wide frequency range, low noise floor, 10-32 coaxial connector.

Compact IEPE accelerometer, 500 mV/g sensitivity, low noise, wide dynamic range.

Ultra high sensitivity, ultra low frequency accelerometer ideal for seismic applications; ultra low noise electronics for clear signals at sub-µg levels.

Compact high frequency accelerometer, 10 mV/g sensitivity, wide frequency range up to 25kHz, side or top exit microdot connector, case grounded.

Miniature high frequency accelerometer, 100 mV/g sensitivity, wide frequency range up to 25kHz, side or top exit microdot connector, case grounded.

Compact general purpose accelerometer with 10 or 100mV/g sensitivity, ±5% sensitivity tolerance, API 670 compliant.

Compact general purpose accelerometer with 100mV/g sensitivity and ±10% sensitivity tolerance.

Compact general purpose accelerometer with 100mV/g sensitivity and ±15% sensitivity tolerance.

Compact integral cable accelerometer for walkaround monitoring, 100mV/g sensitivity, ±15% sensitivity tolerance.

Low frequency, high sensitivity accelerometer with top exit, 500mV/g sensitivity, ±5% sensitivity tolerance.

Case isolated and internally shielded accelerometer, 100mV/g, ±5% sensitivity tolerance, API 670 compliant.

General purpose vibration sensor, 100 mV/g sensitivity, ±10% sensitivity tolerance, top exit 2-pin MIL-C-5015-style connector, case isolated.

General purpose vibration sensor, 100 mV/g sensitivity, ±5% sensitivity tolerance, top exit BNC connector.

Extremely low frequency accelerometer sensor (0.1Hz low end), ±5% sensitivity tolerance, top exit MIL-C-5015-style connector, case isolated.

Case isolated and internally shielded velocity sensor, 1 to 12,000Hz frequency range, 50in/sec peak velocity range.

Low frequency, low profile accelerometer with side exit, 500mV/g sensitivity, ±5% sensitivity tolerance.

Case isolated side exit accelerometer, 100 mV/g with ±5% sensitivity tolerance, API 670 compliant.

Industrial accelerometer sensor, general purpose, 100 mV/g sensitivity, ±10% sensitivity tolerance, low profile with side exit.

High performance top exit accelerometer, 100 mV/g sensitivity, low noise, wide frequency response.

High performance, IEPE accelerometer, 500g amplitude range for high-impact applications or measuring vibration on high-speed (>60,000 CPM) components.

High performance, low frequency, 500 mV/g sensitivity, ±5% sensitivity tolerance, low noise, extended low frequency response.

High performance velocity sensor, 100 mV/in/sec sensitivity, ±10% sensitivity tolerance, low noise, wide frequency response.

High-performance case isolated, internally shielded, side exit accelerometer with 100mV/g sensitivity and ±5% sensitivity tolerance.

Low-frequency case isolated, internally shielded, side exit accelerometer with 500mV/g sensitivity and ±5% sensitivity tolerance.

Radiation-resistant, corrosion-resistant, side exit accelerometer with 100mV/g sensitivity and ±5% sensitivity tolerance.

High-performance, general purpose piezovelocity transducer with 100 mV/in/sec sensitivity and ±10% sensitivity tolerance.

Ultra-high sensitivity 500mV/g or 1V/g, ultra-low noise electronics for clear signals at very low vibration levels.

Low profile triaxial accelerometer with side exit, 100 mV/g sensitivity, ±10% sensitivity tolerance, 4-pin Bendix connector.

Compact high temperature accelerometer for high temperatures to 329°F (165°C), top exit, 100 mV/g sensitivity with ±5% sensitivity tolerance.

High-temperature (up to 165°C) accelerometer, 100mV/g, ±5% sensitivity tolerance, API 670 compliant.

Side exit accelerometer for high temperatures (-58 to 329°F), 100 mV/g with ±5% sensitivity tolerance.

Intelligent vibration transmitter that outputs sensor inputs as a 4-20mA signal, DIN rail mountable with front panel BNC for dynamic signal output.

User-configurable intelligent 4-20mA vibration transmitter module, connects a standard IEPE vibration sensor to a PLC, DCS, or SCADA system.

4-20mA field-configurable transmitter with a 0.2Hz to 20,000Hz signal measurement range.

Peak or RMS acceleration loop powered sensors for continuous monitoring of vibration levels, case isolated, internally shielded.

Intrinsically safe vibration transmitter, RMS, peak equivalent, or true peak acceleration loop powered sensors for continuous monitoring of vibration levels.

Peak or RMS velocity loop powered sensors for continuous monitoring of vibration levels, case isolated, internally shielded.

Intrinsically safe vibration transmitter, peak or RMS velocity loop powered sensors for continuous monitoring of vibration levels.

4-20mA vibration sensor measuring peak velocity output up to 5.0 ips full scale.

HART-enabled velocity transmitter with 4-20mA outputs and 3 user-configurable bands.