TSI Alnor 8392 Certifier Air Velocity Calibrator

Calibrates probed air velocity meters or transducers at velocities from 30 ft/min to 9000 ft/min.

Retired products cannot be ordered

View Company Reviews
Part Number
  • 8392
Manufactured
  • Made in the USA
Includes

Features

  • MKS Pressure Transducer
    • Range: 0 to 10 mmHg
    • Accuracy: 0.15% of reading
  • Model 8495 Transducer Display & Monitor
    • Accuracy: ±0.25% of reading, ±1 digit of resolution
    • Time Constant: 1 to 20 seconds in 1 second intervals
    • Display: 5 digit LED
  • Velocity Range
    • No Nozzle Plate: 1500-9000 ft/min
    • Nozzle Plate No. 1: 250-1500 ft/min
    • Nozzle Plate No. 2: 30-250 ft/min
  • Accuracy
    • No Nozzle Plate: 1.0% of reading ±15 ft/min
    • Nozzle Plate No. 1: 2.0% of reading ±5 ft/min
    • Nozzle Plate No. 2: 2.0% of reading ±2 ft/min

The TSI Alnor 8392 Certifier air velocity calibrator gives you reliable and convenient in-house calibrations at a reasonable cost. You can have the confidence of high accuracies over a wide velocity range with the Certifier. The TSI Alnor 8392 is ideal whenever frequent, accurate, air velocity calibrations are required. Having a Certifier on site avoids the delays associated with sending the instrument to an outside calibration facility. Calibrations can be performed at your convenience as often as necessary.

TSI Alnor 8392 Certifier air velocity calibrators enable you to calibrate your probed air velocity meters or transducers at velocities as low as 30 ft/min (0.15 m/s) and as high as 9000 ft/min (45 m/s) with typical accuracies of ±1 percent of reading. The Certifier comes with a TSI Model 8495 transducer display and monitor that will display actual air velocity. Entering a density correction factor automatically converts the velocity to standard conditions. This allows the user to read air velocity directly from the transducer display and monitor instead of reading pressure and then calculating velocity.

The TSI Alnor 8392 Certifier air velocity calibrator provides a complete system to meet all of your calibration needs. Standard accessories furnished with the system include motor speed controller, large and small nozzle plates, display/power supply, 102 mm wind tunnel, 10 mm HG MKS pressure transducer, step-down transformer, assorted compression fittings, operating and service manual and NIST calibration certificate.