KPSI Cable Hanger

Cable hanger for KPSI level transducers.

This product is an accessory for the following products:

KPSI 27 Series Pressure Transducers
KPSI 27 Series Pressure Transducers

30, 50, 100 and 200 psi ranges available, UL and CUL safety approval standards.

Some Models in Stock
Starting at $405.02
KPSI 700 / 720 Level Transducers
KPSI 700 / 720 Level Transducers

5, 10, or 15 psi ranges available with UL and CUL approvals, FM intrinsic safety approval standard available for most versions.

Some Models in Stock
Starting at $564.19
KPSI 705 Level Transducers
KPSI 705 Level Transducers

Teflon coated elastomeric diaphragm, designed for wastewater applications, UL and CUL safety approvals.

Some Models in Stock
Starting at $635.54
KPSI 750 Level Transducer
KPSI 750 Level Transducer

Non-clogging 2.75 inch sensing area with UL and CUL safety approvals for slurry or highly viscous applications.

Some Models in Stock
Starting at $781.18
KPSI 300DS Level Transducer
KPSI 300DS Level Transducer

Deep submersible range of 700 to 4614 ftH2O, small bore 0.75 inch diameter.

RETIRED
KPSI 320 Level Transducer
KPSI 320 Level Transducer

Small bore, 0.75 inch diameter, UL, CUL & FM intrinsic safety approval standard, 20 and 50 psi ranges available.

RETIRED
KPSI 330 / 335 Level Transducer
KPSI 330 / 335 Level Transducer

Small bore, 0.75 inch diameter, submersible up to 700 feet with UL, CUL & FM intrinsic safety approval standard.

RETIRED
KPSI 342 Level Transducer
KPSI 342 Level Transducer

Asic technology, small bore 0.75 inch diameter, submersible up to 230ft.

RETIRED
KPSI 351 / 353 / 355 Level Transmitters
KPSI 351 / 353 / 355 Level Transmitters

SDI-12 serial-digital interface, small bore 0.75 inch diameter, submersible up to 230ftH2O.

RETIRED
KPSI 500 / 501 Level Transducers
KPSI 500 / 501 Level Transducers

1 inch bore diameter, ±0.05%FS total error band over complete operating range, SDl-12 output.

RETIRED
KPSI 735 Level Transducer
KPSI 735 Level Transducer

Submersible up to 700 feet with UL and CUL approvals, and FM intrinsic safety approval standard available for most versions.

RETIRED

The Cable Hanger is used to suspend the transducers in the liquid media. The hanger slides onto the cable from the unterminated end and is easily positioned while pushing the ends of the hanger together. As the hanger expands from the weight of the transducer, it grips the cable by the sheath. The cable hanger is 6.0 in (15.3 cm) long and is constructed of 304 stainless steel.

The cable hanger is not recommended for cable lengths in excess of 500 ft (150 m) as it does not take advantage of the Kevlar® strength members in the cable.